升降货梯断电器的重要作用

断电器是升降货梯http://www.jntr168.com/中必不可少的元件，其作用是不容忽视的。断电器可以很好的保护升降货梯的电路系统，防止电路损坏给设备带来不良影响，从而大大保证了适用人员的人身安全并能够保证设备的正常运行。那么断电器应该如何接入呢？

1、正确接入电源，交流电有380v和220v两种，不要接错。升降货梯如果采用直接把断电器焊接在升降货梯的印制板上使用，要保证断电器引出线能顺利插下，防止贴得过紧使断电器根部受到张力的作用。
Proper access to power, 380v and 220v AC have two kinds, do not take the wrong. If cargo lifter welded directly to the breaker used on cargo lifter PCB, to ensure a smooth breaker inserted under Lead prevent stick too tight so that the roots under tension breaker role.
2、焊接时要防止温度过高，因焊接温度过高可造成升降货梯的断电器线圈与引出端脱焊，并影响簧片触点性能，还可能造成构件开裂。焊接完后要进行清洗，防止焊料的有害物质侵害到断电器根部。
Welding To prevent overheating, due to high temperature soldering can cause cargo lifter breaker coil terminals Desoldering, and affect the performance of the reed contacts and may cause component cracking. After welding must be cleaned to prevent solder against harmful substances into the breaker roots.

3、对于硬引出端的升降货梯http://www.jntr168.com/断电器，在安装时不允许弯折，以防止玻璃绝缘子破裂造成漏气。要求选择插座以防过紧或过松，并保证插座清洁，防止接触不良，对于软引出端的断电器，尽量避免往返弯折，并保证根部不受力。
For hard terminations Huoti breaker, the installation does not allow bending, glass insulators to prevent breakage caused by leakage. Asked to select the socket to prevent too tight or too loose, and to ensure that the socket clean and prevent bad contact terminals for soft breaker, avoid bending back and forth, and to ensure that the roots of no force.
4、升降货梯断电器应在干燥、阴凉处使用。
Cargo lifter breaker should be in a dry, cool place to use.